|Yes and Welcome
|New Zealand Pine/rubber/ sapele
|Stamped/silk print/heat transfer
|shrinking wrap/color box/whitebox
|7-10 days after artwork approved
|40-50 days after received the deposit
There are two sets of 20 ball pins in each fairway. The ball pins are mainly made of maple wood, which is processed by special processes such as drilling, bonding, grinding and spraying, and the surface is processed into a very smooth curve with plastic compounds. Weight: The weight of the ball is between 1.26-1.46 kg. In a set of 10 pins, the heaviest and lightest weights must not differ by more than 113.4 grams (4 ounces). Size: Height 38.85 cm, thinnest part 4.6 cm, thickest part diameter 12.1 cm, thickest part circumference 38 cm, bottom diameter 6 cm. Center of Gravity: The balance center of gravity of the pin should not be higher than about 12.38 cm and not lower than 18.52 cm. The bottom of the bottle is equipped with a reinforced plastic ring. The 10 pins are arranged in the form of an inverted triangle with a length of 91.40 cm on each side. The center of one pin is separated from the center of the other pin by about 30.48 cm, and they are arranged in four rows.
Marking on the surface of the pins There are two labels on each pin, one is the manufacturing label, including: industry name, ABC/WIBC license number, ABC/WIBC license; the other is ABC in accordance with the pattern regulations provided by ABC/WIBC /WIBC label, but this label must be affixed to the exact opposite of the manufacturing label.